soundcore 3 | Bluetooth Speaker with Stereo Sound

How to Pair soundcore 3, Mini 3, and Flare 2 Speakers via PartyCast

How do I connect multiple SoundCore 3 speakers via PartyCast?

Partycast - As Master Speaker

1.Turn on the soundcore 3 - Connect to Phone via Bluetooth.

2.Once connected, press the bluetooth button for at least 3-5 seconds until it begins flashing white.

3. Connect additional speakers using Instructions on other speakers. Light will remain flashing white at all times.

Partycast - As secondary Speaker

1. Turn on soundcore 3.

2. Press Bluetooth button for at least 3-5 seconds until it begins Flashing White.

3. Double Press Bluetooth Button to begin pairing to the master speaker. Allow the speaker to connect, it can take 2-5 seconds.

4. Once bluetooth light is solid white, speaker is successfully connected.

How to reduce the audio delay when pairing with a Bluetooth device?

- Confirm the speaker is fully charged

- Hold the Power button and volume+ for 4s to reset the speaker

- Try the speaker with another device; try another app or audio source

- Try the firmware updating in the soundcore app

How to charge the speaker?

Normally, SoundCore3 speaker charges with a USB-C charging cable at 5V/2A wall charger for 3.5-4hrs(the power light will stay steady red when charging and the red indicator will turn off after fully charged).Just make sure the voltage is 5V and there is no special requirement about the current.

Can the carrying box of the soundcore2 can used for soundcore3?

Yes, you can use our official travel box of soundcore2 speaker to carry the soundcore3 speaker since the product dimensions of the two items are similiar.

Does this speaker have a microphone in it ?

The speaker is made of a built in Microphone. It's designed for listening to music mainly, and the mic actually is not designed to be a main feature of the speaker, but just a side benefit.

I have the specs for the speaker for soundcore 3 but I don't know the specs for the soundcore boost device. I want to know which speaker is superior?

1) Output: soundcore 3 has an 8w*2 output power, the soundcore Boost speaker has a 10*2 output;

2) Multi-Speaker: soundcore 3 supports PartyCast™ can pair with 100+ speakers, soundcore Boost speaker supports TWS with 2 speakers to create stereo sound.

It says that it supports stereo, but it is not stereo. Please tell me how to make it stereo?

When used alone, the soundcore3 speaker supports stereo sound, but it does not support stereo sound when multiple speakers are connected using PartyCast.

Can the speaker usb-c port be used to charge a phone?

The speaker usb-c port is input only.

is this the newly released version? and do we need a minimum 5V/2A adapter to charge in 4 hrs?

This is our newly released version. The charging time for this speaker is around 3.5-4hrs at 5V/2A.

Does it make a sound when turning on and pairing with other devices while music is playing? if so, can that sound be disabled ?

Yes, you can turn off the sounds. In the soundcore app, device settings, switch “Voice prompt” off.

Can it be used while plugged in/charging?

Normally you can use the SoundCore 3 speaker while plugged in, but we don't suggest using it while charging all the time as this may influence battery life in the long term as all other electronic products.

Does the EQ work when you are playing the audio from tv?

Yes, the EQ sets the setting in the speaker, so whatever you stream to it uses the eq you set.

Does it have FM Radio?

We regret to say this SoundCore 3 speaker doesn't have FM radio.